Galvanized hexagonal gabion wire mesh
1. Information:
Stone cage net by high corrosion, high strength, has the ductility of low carbon steel wire or coated PVC wire above using mechanical woven, produced by using the net box structure is stone cage. According to the ASTM and EN standards, the use of low carbon steel wire diameter and different according to the engineering requirement. Generally between 2.0 4.0 mm, stone cage net wire tensile strength of not less than 38 kg/m2, metal coating weight is generally higher than 245 g/m2, the edge of the gabion mesh wire diameter than general cable diameter. Its double stranded part shall not be less than 50 mm. The length of the part to ensure the stranded wire metal coating and PVC coating are not destroyed.
Application
Stone cage net can be used in the slope support, foundation pit supporting, mountain rockface net-suspended spray, slope vegetative guarding block (green), railway highway isolation, it can also make luggage, gauze pad, used in rivers, DAMS and scour prevention of seawall protection, reservoir, river closure with a box. Is the most serious disasters river water scouring the bank make its damage, caused by the flood, leads to a lot of losses of lives and property and a large number of soil and water loss. So when in dealing with these problems, the application of the structure of the ecological grid becomes one of the best solution, it can make the river Banks of the river to receive permanent protection.
2. The material classification
Galvanized steel wire: High quality low carbon steel wire, steel wire of 2.0 MM to 4.0 MM in diameter, the tensile strength of steel wire shall not be less than 380 mpa, hot galvanizing protection on the surface of the steel wire, galvanized the thickness of the protective layer of production according to customer requirements, up to a maximum of 300 g/m2 galvanized quantity.
Aluminum zinc - 5% - mixed rare earth alloy wire: (also called gore van) wire, this is a kind of international emerging a new a new material, corrosion resistance is three times bigger than the traditional pure galvanized, steel wire diameter of 1.0 MM to 3.0 MM, the tensile strength of steel wire shall not be less than 1380 mpa.
Length*Width*Height |
2m x 1m x 1m, 3m x 1m x 1m, 4m x 1m x 1m, 2m x 1m x 0.5m, 4m x 1m x 0.5m or Customized |
Mesh Size |
60*80; 80*100; 100*120 as standard, or customized |
Wire Diameter |
2.00mm to 4.0m or customized |
Surface Finish |
Electro galvanized
Hot dipped galvanized
Galfan coated
PVC Coated |
Weaving |
Double Twist |